|
| Compact, High-density System |
Rack-mount server with a height of 1U (1.75 inches) and a depth of 20.0 inches |
| Configuration Flexibility |
Two-way capability in low profile and cost/value-effective packaging
Stand-alone system
Up to two Dual-Core Intel® Xeon® processors, LV5100 series |
| Serviceability |
Rear access to hot-swappable power supplies
Front access to hot-swappable hard disk drives |
| Availability |
Up to two hot-swappable 450W power supplies in a redundant (1+1) configuration
Integrated support for software RAID levels 0 & 1 using three internal hot-swappable 2.5-inch SAS disk drives, and RAID levels 0, 1, and 10 when using additional external SAS drive(s) through rear-panel connector.
Supports ROMB (RAID On Mother Board) hardware RAID operation for RAID 5 capability with addition of optional Intel® RAID Activation Key and ECC Mini-DIMM.
Memory rank sparing |
| Manageability |
Remote management and diagnostics support
Emergency management port (serial and LAN)
IPMI 2.0 compliant
Support for optional SysCon board |
| Upgradeability and Investment Protection |
Supports Dual-Core Intel® Xeon® processors, LV5100 series<
br/>Multi-generational chassis
Supports Intel® 64 architecture (formerly known as Extended Memory 64 Technology) |
| System-level Scalability |
Supports up to 24 Gbytes of DDR2-533 or DDR2-667,registered SDRAM FBD
DIMM memory
Supports two Dual-Core Intel® Xeon® processors, LV5100 series
Full-height, full-length, 64-bit x 100/66 MHz PCI-X or x8 PCI Express slot
Three internal hot-swappable 2.5-inch SAS hard disk drives
Supports up to four external SAS hard disk drives
Low-profile optical drive |
| Front Panel |
Power switch
Reset switch
NMI switch
ID switch
Main power LED
HDD activity LED
NIC activity LED
ID LED
Telco power alarm fault LED/relay
Telco critical alarm fault LED/relay
Telco major alarm fault LED/relay
Telco minor alarm fault LED/relay |
|
|
| Temperature, Operating |
+5°C to +40°C (41°F to 104°F) |
| Temperature, Non-operating |
-40°C to 70°C (-104°F to 158°F) |
| Altitude |
95%, non-condensing at temperatures of 23°C (73°F) to 40°C (104°F) |
| Vibration, Operating |
Swept sine survey at an acceleration amplitude of 0.1 g from 5 to 100 Hz and back to 5 Hz at a rate of 0.1 octave/minute, 90 minutes per axis on all three axes as per Bellcore GR-63- CORE standards |
| Vibration, Non-operating |
Swept sine survey at an acceleration amplitude of 0.5 g from 5 to 50 Hz at a rate of 0.1 octaves/minute, and an acceleration amplitude of 3.0 g from 50 to500 Hz at a rate of 0.25 octaves/minute, on all three axes as per Bellcore GR-63-CORE standard.
2.2 Grms, 10 minutes per axis on all three axes as per the Intel Environmental Standards Handbook |
| Shock, Operating |
Half-sine 2 G, 11 ms pulse, 100 pulses in each direction, on each of the three axes as per the Intel Environmental Standards Handbook |
| Shock, Non-operating |
Trapezoidal, 25 G, 170 inches/sec delta V, three drops in each direction, on each of the three axes as per the Intel Environmental Standards Handbook |
| Acoustic |
Sound pressure: < 55 dBA at ambient temperatures < 24°C measured at bystander positions in operating mode |
| RoHS |
Complies with RoHS Directive 2002/95/EC |
|
|
| Front Access |
Rear Access |
Serial B port (RJ45)
USB 2.0 port |
Dual PS/2 ports for keyboard and mouse
Serial B port (RJ45)
Two USB 2.0 ports
Four GbE ports
GCM 100 Mbps management port
SAS 4x drive port with RAID support
Video port
Telco alarms port |
1 Please contact us for or more information about cluster configurations.
2 1) Max. capacity is derived based on the type, size, and number of the drives.
2) Max. capacity is calculated using Base10 arithmetic (1TB = 1012 bytes).
3 RAID 6 is the recommended configuration for drives greater than 144GB.
4 Maximum capacity is calculated using Base10 arithmetic (1TB = 1012 bytes).
5 Minimum software requirement of Data ONTAP 7.3.1.1 for FAS2020 |
|
|
| Height |
1.70 inches (43.2 mm) |
| Width |
16.93 inches (430.0 mm) |
| Depth |
20.0 inches (508 mm) |
| Front Clearance |
2.0 inches (76 mm) |
| Side Clearance |
1.0 inches (25 mm) |
| Rear Clearance |
3.6 inches (92 mm) |
|
|
